12
The second option is to use Main Menu function
30 TDR
(see page 18) to select Manual Band Selection. By setting
this function to
OFF
, you can still program two different
channels in Band A and Band B but in this case only Band
A or Band B is displayed on the LCD screen at any one time
(selected by using the A/B button) and the band will not be
automatically swapped should you receive a transmission
from the non-selected band.
To go back to automatic band swapping, set the
TDR
function to
ON
.
5.4 TRANSMIT
To transmit, press the
(A) PTT
Transmit
button on the side of
the CB. Release the button to
receive the reply.
5.4.1 SIDE KEYS
(B) Side Key 1:
Instant Squelch
Press and hold this key to hear
all channel noise. This function
is useful if the signal you are
trying to receive is very weak.
To adjust the regular squelch
setting, please see the menu
shortcut on the next page.
(C) Side Key 2:
Emergency Siren
& Personal Alarm
Press to activate the siren. Use the Power/Volume knob to
increase or decrease the siren volume to attract attention.
The siren will also be transmitted on the selected CB
channel to also attract attention. To stop the siren, simply
press Side Key 2 again or press the
PTT
button.
A
B
C
