System
2
© 2011 TRW Automotive, Parts & Service
2
LCD Display Monitor
2.1
LCD Display Monitor Installation
Before installation, please check that all parts are in place, including the LCD Display Monitor,
sensor, monitor window suction holder, power cord and spanner wrench.
Step 1.
Select a suitable location to mount the monitor window suction holder on your windshield. Clean
and dry the suction cup holder and the selected area of the windshield. Make sure the distance between
cigar lighter socket and the place is within the reach of the enclosed power cord (2 meters).
Step 2.
Place the suction cup on the windshield, and flip the lever back toward the windshield. Then,
tighten the knob. (fig.2.1.1)
fig.2.1.1
fig.2.1.2
fig.2.1.3
