EnTire Solution TPMS User Manual
17
© 2011 TRW Automotive, Parts & Service
3.2
Sensor Installation
Sensor Installation
Ensure that the LCD monitor is installed and powered on.
Step 1.
Use the provided spanner wrench to turn the cap anti-clockwise to open the sensor. (fig.3.2.1)
Step 2.
Release sensor’s bottom cover from the sensor by pushing down on sensor’s valve stem
connector. (fig.3.2.2)
Step 3.
Slip sensor’s bottom cover through the valve stem. (fig.3.2.3)
Step 4
. Bring the inner sensor to the valve stem and turn clockwise until it is firmly tightened. A brief
hissing air sound should briefly occur when the sensor is being mounted. (fig.3,2,4)
fig.3.2.1
fig.3.2.2
fig.3.2.3
fig.3.2.4
