LCD Display Monitor
14
© 2011 TRW Automotive, Parts & Service
2.11
Year Setting and Date Setting
Parameter Setting Mode
Operation of Buttons
Press and hold the “Set” button for 3 seconds, the system enters into setting mode. Press “Prog” button
to move cursor around and “Up” or “Down” button to increase or decrease the display value.
Year Setting
The LCD Display Monitor indicates “Se—y”. Set year based on above-mentioned operation. Press the
“Set” button to move to the next data input step. (fig.2.11.1)
fig.2.11.1
Date Setting
The LCD Display Monitor indicates “Se—d”. Set the date accordingly (date format is MM.DD). Press the
“Set” button to move to the next data input step. (fig.2.11.2)
fig.2.11.2
