AutoVap15 Operating Manual | | v. 1.2
15 / 23
STEP 5: RESIDUE DISCHARGE
You will continue to repeat STEP 4: SOLVENT DISCHARGE while monitoring your Residue Recovery
Vessel. When the Residue Recovery Vessel is filled to your desired capacity (be sure not to overfill), you
are ready to discharge the residue material.
Note: AutoVap1 Plus will also need to manually discharge residue
NOTE: This process is similar to STEP 4: SOLVENT DISCHARGE, except you will be opening the Residue
Discharge Valve
WARNING:
When removing the crude oil be very CAREFUL as it is EXTREMELY HOT.
1. Stop Feed Pump (Press "STOP" on VFD Remote Control)
2. Close the Feed Line Ball Valve (see diagram above to locate Feed Line Ball Valve)
