TRUST 960 POWERC@M CCD
10.2
Using the macro function (close-up photographs)
The Trust 960 PowerC@m CCD has a macro function which can be used to take
photographs at a minimum distance of 20 cm.
U K
Selecting the macro mode:
Slide the macro button (5, figure 2) upwards or downwards (see table 8 for an
explanation).
Standard mode
Distance: 80 cm to infinity.
Macro mode (for taking close-up photographs)
Distance: 20 cm
The macro symbol will be displayed in the bottom left-hand corner of the
LCD screen when this mode is selected using the macro button (5,
figure 2).
Table 8: Macro options
Note:
It is recommended to use the stand and the automatic exposure
function (see chapter 10.3) when using the macro function.
10.3 Automatic
exposure
The camera has an automatic exposure function which gives a time delay of 10
seconds before the photograph is taken. You can use the automatic exposure
function to take a photograph of yourself.
The default setting when the camera is turned on is off. The automatic exposure
function can be turned on as follows.
1.
Set the camera to the ‘Capture’ mode.
2.
Press the control button upwards to select the automatic exposure function.
The symbol for the automatic exposure function will appear on the LCD
screen.
Press the exposure button (1, figure 1) to take a photograph using the automatic
exposure function.
Whilst counting down (10 seconds):
- A beep will be heard.
- The number of seconds remaining will be displayed on the LCD screen.
- The automatic exposure indicator (4, figure 2) will flash.
Note:
It is recommended to use the stand when taking a photograph
using the automatic exposure function.
11
