background image

6

ENGLISH

Safety warnings for

circular saws

Retractable guard

Before each use double-check if the retractable guard and 

the spring are working correctly. If the guard is not 

moving freely or not closing instantaneously service them 

before further operation with the tool.

The retractable guard could work slowly because of 

damaged parts, gummy deposits or debris accumulation. To 

prevent from this possibility clean regularly the insides of 

both guards and the disc axis. Use kerosene or compressed 

air. Before cleaning disconnect the machine and remove the 

cutting discs.

The retractable guard can be opened manually. Make this 

only when changing discs and when making cuts such as 

cut marking

 or 

combined cut

. Using the guard lever open 

the retractable guard. As soon as the disc gets into the 

material, release the lever. For any other type of cuts the 

guard should operate automatically. Never leave the 

retractable guard in the open position.

The retractable guard might bend due to a stroke or if it 

falls. Before operating the tool, verify it moves freely in 

every angle and cutting depths.  The guard should not 

touch the cutting disc or any other part of the tool.

   

          Verify the retractable guard covers the 

disc before setting the saw on a bench or on the floor.   A 

disc rotating due to inertia could cause the saw to move 

backwards cutting whatever objects in its way.  Verify the 

disc stops moving after turning off the tool.

   

          Remember that the guards do not 

protect you from the moving disc below the work piece.  

Never squat or put your hand below the work piece when 

the tool is running..

Dust coming from some materials have chemical 

substances known to cause cancer, birth and reproductive 

defects. Some of these chemical substances are:

• Lead in lead-based paint.

• Arsenic and Chromium in wood treated with chemical 

substances.

• The risk involved due to exposure to these substances 

varies with the frequency this type of job is made. To 

reduce being exposed to the chemicals work in 

well-ventilated areas, use the adequate safety equipment, 

such as dust-mask specifically designed to filter 

microscopic particles.

Toxic materials

WARNING

WARNING

Содержание 11779

























Отзывы: