Trumpf TruTool N 700, Руководство оператора

Страница: 7 / 26

Note
The nibbling process produces cutting edges free of deforma-
tions.
2.2 Technical data
Other countries USA
Voltage 230 V 120 V 110 V 120 V
Frequency 50/60 Hz 50/60 Hz 50 Hz 50/60 Hz
Max. material thickness:
Steel 400 N/mm
2
7.0 mm 7.0 mm 7.0 mm 0.28 in
Max. material thickness:
Steel 600 N/mm
2
5.0 mm 5.0 mm 5.0 mm 0.2 in
Max. material thickness:
Steel 800 N/mm
2
3.5 mm 3.5 mm 3.5 mm 0.14 in
Max. material thickness:
Aluminum 250 N/mm
2
10 mm 10 mm 10 mm 0.4 in
Working speed 1.3 m/min 1.1 m/min 1.1 m/min 3.6 ft/min
Nominal power consumption 1600 W 1340 W 1500 W 1340 W
Idle stroke rate 440/min 470/min 440/min 470/min
Weight 8.3 kg 8.3 kg 8.3 kg 15.4 lbs
Cutting track width 11 mm 11 mm 11 mm 0.472 in
Starting hole diameter for die 60 mm 60 mm 60 mm 2.95 in
Sheet profiles 90° inner bending
radius min. 10 mm min. 10 mm min. 10 mm 0.4 in
Smallest radius for curved cut-
outs 135 mm 135 mm 135 mm 5.3 in
Distance to the template 11 mm 11 mm 11 mm 0.433 in
Protective insulation
II / II / II / II /
Tab. 1
2.3 Symbols
Note
The following symbols are important for reading and understand-
ing the instruction manual. The correct interpretation of the sym-
bols will help you operate the tool better and safer.
E528EN_06 2011-04 Technical data 7
deskPDF Studio Trial