Trumpf TruTool N 700, Руководство оператора

Страница: 12 / 26

3.3 Setting the penetration depth
Note
A greater penetration depth causes less vibrations, but a greater
effort is required when pushing the machine forward and the
service life of the punch is reduced.
1 Eccentric shaft
2 Die carrier
3 Punch
4 Locking mechanism
E Penetration depth
Fig. 38378
1. Rotate the eccentric shaft (1) until the punch (3) has reached
its maximum penetration depth.
2. Open the locking mechanism (4).
Note
One rotation of 360° corresponds to a height adjustment of
1.75 mm.
12 Selecting a punch 2011-04 E528EN_06
deskPDF Studio Trial