4.
Operational safety
The machine can result in the following dangers if it is used
inappropriately or for purposes other than those intended, or
else if it is not safe to operate:
■
Dangers to the safety of the personnel.
■
Damage to the machine and other material assets of the
user.
4.1
Intended use
The user may use the machine in the industrial and commercial
sector.
Installation, operating and transport conditions defined by
TRUMPF must be adhered to and maintenance work must be
carried out in accordance with the Operator's manual. The user
must observe the specifications of the country in which the
machine is being operated as well as national and regional
safety and accident prevention regulations.
The user may use the machine to weld mild steel, aluminum
and stainless steel. MAG/MIG welding and CMT welding are
authorized welding processes.
The following is not permitted:
■
Any working procedure that impairs the safety.
■
Operation of the machine with a welding device that was not
delivered with the machine. Operation of the machine with
another welding device is only permitted after consultation
with TRUMPF.
■
Operation of the machine in explosive or corrosive atmos-
phere.
■
The processing of materials that do not comply with the
defined specifications.
Any use going beyond this is considered to be unauthorized
use. TRUMPF is not liable for any damage, especially personal
injury and damage to property as well as production failures
resulting from this. The risk is borne solely by the user. The war-
ranty will be voided.
If the user changes or modifies the machine, then the user
rather than TRUMPF is responsible for the safety of the
machine.
B1154en
2020-09-01
Operational safety
1
‐
7
Machine
Disclaimer
