1.
Safety concept
The "Safety" chapter describes the safety concept of the
machine. It specifies the guards and the manufacturer's design
measures for safe operation of the machine.
It points out dangers when handling the machine and specifies
measures taken by the user to avoid possible dangers.
The "Hazards" section is based on the manufacturer's risk
assessment and describes the residual risk. The user must take
measures to prevent the hazards. The measures must comply
with the national safety and accident prevention regulations of
the country in which the machine is operated.
Dangerous points on the machine are marked with warning
signs and information plates.
The operator's manual contains warnings, which warn of dan-
gers and specify measures to avoid these dangers.
Warnings have the following structure:
■
The signaling word designates the degree of a danger.
■
The danger description specifies the danger and possible
consequences if attention is not paid to the danger.
■
The measures for prevention of the danger are planned.
Example of a warning:
Risk of fatal injury due to falling load!
Ø
Observe safety regulations for the handling of heavy loads.
Ø
Never walk under a suspended load.
Ø
Use certified tackle and means of transportation of sufficient
size.
Ø
Employ qualified technicians to transport the machine.
Ø
Carry out transport in accordance with the transport regula-
tions.
A warning contains signaling words that are explained in the fol-
lowing table:
Signaling word
Description
DANGER
If the dangerous situation is not prevented, death or
serious injuries will result.
WARNING
If the dangerous situation is not prevented, death or
serious injuries could result.
B1154en
2020-09-01
Safety concept
1
‐
3
Chapter Safety
Warning sign and
information plates
Warnings
DANGER
