Tilting and falling workpieces
Tilting or falling workpieces!
Head and hand injuries.
Ø
Only process workpieces up to a max. size of 2000 x 600 x
600 mm (78.7 x 23.6 x 23.6 in).
Ø
Place workpieces statically with clamping fixtures (e.g. col-
lets, etc.) and bring them into a position with a secure
center of gravity.
Ø
People who are not involved may not stay in the danger
area.
Sharp-edged workpieces
Workpieces have sharp edges!
Cutting injuries of the hands.
Ø
Wear protective gloves.
Wire feed from the welding torch
After opening the anti-glare protection or one of the safety
doors, the robot remains in its current position.
If the robot is not in home position, there is a risk of stab inju-
ries when working on the wire of the welding torch, e.g. when
cutting the wire at the feed.
Wire tip in working area!
Stab injuries to hands and eyes!
Ø
Wear protective gloves.
Ø
Wear safety goggles.
5.2
Dangers from electricity
Work on electrical equipment and live parts is only allowed to
be carried out by trained qualified personnel.
1
‐
10
Hazards
2020-09-01
B1154en
CAUTION
CAUTION
CAUTION
