Trumpf BendMaster 150, Руководство оператора

Страница: 74 / 258

1 Pulse trigger switch
2 Red LED for "indication of error
messages"
3 Green LED "Ready for opera-
tion"
4 Button array
5 Menu selection button
6 START
7 STOP
8 Screen
9 Emergency stop IMPACT BUT-
TON
10 SPEED BUTTON
11 Traverse buttons
12 Button for DISPLAYED COOR-
DINATE SYSTEM
13 Button for MOVE COORDI-
NATE SYSTEM
Portable manual control unit Fig. 39796
Tip
Reset the program at the manual control unit:
■ Press the following keys simultaneously:
<Robot> menu, <Position> menu, <V+>.
The control panel also contains the visualization computer and
the control cabinet of the BendMaster. The main switch is on the
front side.
The visualization computer is connected via the local network to
the industrial PC in the switch cabinet of the BendMaster.
3.9 Easy operation
A stationary 19" screen can be set up on the control panel in
addition to the portable manual control unit with 8.4" screen. A
keyboard and mouse are also provided with the screen.
3
‐
10
The most important assemblies 2015-06-01
B579EN