Trumpf BendMaster 150, Руководство оператора

Страница: 52 / 258

■ The entire installation surface must consist of a continuous
base plate with a smooth surface in the area of the load-
bearing points.
■ The distance of the plug bore holes to the edge of the base
plate must be at least 200 mm (8 in).
■ If foundations are present, the arrangement of the expansion
joints must be paid attention to.
A Joint arrangement permissible B Joint arrangement not permissible
Expansion joints, top view Fig. 58390
Floor quality
Note
The floor must be oil-proof.
Possible combinations in the bending cell:
■ BendMaster (60) with TruBend 5085 to TruBend 5230 (S).
■ BendMaster (150) with TruBend 5130 to TruBend 5320.
2
‐
8
Installation site - Version 10
B579EN
Expansion joints
Elastically cushioned base
plate