Trumpf BendMaster 150, Руководство оператора

Страница: 36 / 258

5. Organizational measures to be taken
by the user
5.1 Observing warnings and danger
signs
Certain activities can be a source of danger during the operation.
The documentation contains warnings before the instructions for
these activities and danger signs are provided on the machine.
5.2 Training and instructing operators
Measures applicable worldwide
The user must take the following measures before the personnel
start working on the machine:
■ Train personnel appropriately.
■ Inform the personnel about the possible dangers and the
safety measures.
■ Keep personal protective gear ready.
■ As far as possible, ensure personnel wear protective gear
(e.g. gloves, safety shoes, hearing protection, safety
glasses...).
■ Define responsibilities for safety, operation, maintenance, set-
ting work and service.
■ Require that personnel read the technical documentation of
the machine. Recommendation: obtain written confirmation
from the personnel.
■ For fault diagnosis and error correction, a connection will be
made via Teleservice by TRUMPF between the machine and
Technical Service. When the machine is commissioned the
user will be informed about the sequence and possible risks
of the Teleservice. The user must provide safety instruction
to operators who are involved in the Teleservice.
5.3 Adhering to the duty of care when
handling the machine
The operator must always make sure that nobody is within the
danger zone before starting up the machine.
The operator may only operate the machine using safety devi-
ces. Safety devices may not be removed or put out of operation,
except when performing maintenance and service work. The
1
‐
20
Organizational measures to be taken by the user 2015-06-01
B579EN
Checking the danger zone
and safety devices