Trumpf BendMaster 150, Руководство оператора

Страница: 22 / 258

■ Exceeding the maximum load capacity (workpiece and grip-
per weight) of:
−
60 kg with BendMaster (60).
− 150 kg with BendMaster (150).
■ Use outdoors.
■ Utilization of the portable manual control unit in the vicinity of
heat sources or direct sunlight.
Any other form of use is considered unauthorized use. TRUMPF
is not liable for any damage, especially personnel injuries and
production failures resulting from this. The risk is borne solely by
the operator. The warranty will be voided.
TRUMPF assumes no liability for material damage or personal
injury caused by gripper elements and peripheral equipment built
by the user himself (e. g. conveyor systems for the workpieces,
sheet thickness measurement devices). The user bears sole
responsibility for using self-built gripper elements.
2.2 Authorized personnel
■ Operation, setting and maintenance work may only be
carried out by authorized, trained and instructed personnel.
■ Qualified personnel may:
−
Transporting the machine to the installation site.
− Carry out work at the hydraulic, pneumatic and electrical
modules.
− Disassembling the machine.
1
‐
6
Operational safety 2015-06-01
B579EN
Exemption from liability