Trumpf BendMaster 150, Руководство оператора

Страница: 19 / 258

1. For your safety
With the CE marking and the EC Declaration of Conformity,
TRUMPF confirms that the machine meets the basic health and
safety requirements of the EC Machinery Directive.
The CE marking is located on the nameplate of the machine.
The EC Declaration of Conformity is delivered along with the
machine.
The machine meets the requirements of safety standard ANSI
B11.3.
This chapter describes the safety concept. The chapter describes
how potential dangers can be avoided. The overview of residual
risks contains measures to be taken by the operator in order to
reduce the residual risks.
Notes
■ The operator must adhere to the valid safety and accident
prevention regulations of the respective country and the
safety laws of the state and of the region!
■ USA and Canada: TRUMPF also recommends compliance
with the ANSI safety regulations for press brakes.
■ Observe the operator's manual for the press brake.
Certain operations can be a source of danger during operation.
The documentation contains warnings before the instructions for
these activities. There are danger signs on the machine.
A warning contains signaling words that have been explained in
the following table:
Signaling word Description
DANGER ... refers to great dangers. If not avoided, it can result
in death and serious injuries.
WARNING ... refers to a dangerous situation. It could lead to seri-
ous injuries, if it is not avoided.
CAUTION ... indicates a potentially dangerous situation. It could
lead to injuries, if it is not avoided.
NOTICE If such a situation is not observed, it can lead to dam-
age to property.
Tab. 1-1
B579EN
2015-06-01 For your safety
1
‐
3
Regulations and guidelines
Chapter Safety
Warnings and danger signs