Trumpf BendMaster 150, Руководство оператора

Страница: 156 / 258

software V7.0) will automatically set the gripper weight to the
maximum value. The gripper weight can be manually changed in
the program:
1. Details Press > Gripper weight .
2. Enter the correct gripper weight.
3. Press
Continue .
6.7 Loading and unloading areas
When a job is set up, all loading and unloading areas need to
be set up. Selection:
Fig. 48245
■ Areas that cannot be changed.
Lines and areas Description
Lines, orange Fixed contours, e.g. bending cell or press brake.
Dotted area, white Working areas (unloading areas).
Thin lines, green Possible search area for the rough recognition
(loading areas).
Lines, white Sheet removal station or conveyor belts.
Plane, blue
(not displayed by
default)
Loading area specified by TruTops Bend (cannot be
displaced).
Areas which cannot be changed Tab. 4-12
■ Loading areas (see "Tab. 4-16", pg. 4
‐
66) :
4
‐
62
Running in a TruTops program 2015-06-01
B579EN
Area types