Trumpf BendMaster 150, Руководство оператора

Страница: 154 / 258

Name Description
"Fine recognition" "Basic setting":
■ No fine recognition .
■ Fine recognition on the stack, once .
Fine recognition is carried out once for each stack.
■ Fine recognition at the stack, periodic .
Fine recognition is carried out at defined intervals in the stack:
−
"Period": number of blanks after which a fine recognition takes place. If, for
example, 3 pieces are entered, a fine recognition is carried out after every
third blank.
− "Tolerance position": specification of the maximum position deviation between
two fine recognition windows.
If the deviation too great, the stack is marked as locked. Depending on the
error strategy which has been set, a new rough or fine recognition process
can be carried out on the backlighting table.
− "Rotational position tolerance": maximum deviation of the rotational position
between two fine recognition windows.
If the deviation is too great, the stack is marked as locked. Depending on
the error strategy which has been set, a new rough or fine recognition proc-
ess can be carried out on the backlighting table.
■ Fine recognition on the backlighting table: : fine recognition is carried out on the
backlighting table (e.g. for strongly reflective parts). Can only be selected if a
backlighting table is available.
"Additional height meas-
urement" "Basic setting":
■ No height measurement .
■
Periodic height measurement .
Height measurement is carried out at defined intervals in the stack:
■ Fine recognition at the stack, periodic .
Fine recognition is carried out at defined intervals in the stack:
−
"Period": number of blanks after which a height measurement takes place. If,
for example, 3 pieces are entered, a height measurement is carried out after
every third blank.
− "Height compensation": an exact height measurement is carried out prior to
the fine recognition process in order to compensate for the programmed
height during the fine recognition process. The determined difference (offset)
between the first and second fine recognition windows is displayed as "Offset
fine recognition 1" and "Offset fine recognition 2" in the Stack details window.
"Error strategy/recognition" "Basic setting":
■ No error processing : no action is performed after a faulty fine recognition.
■ New rough recognition : after a faulty fine recognition, first a rough recognition
and then a fine recognition are carried out.
■ Backlighting table : can only be selected if a backlighting table is available.
− For fine recognition with two fine recognition windows: if the two fine recog-
nition windows lie outside the previously entered "position"" or "rotational
position", tolerances, a fine recognition is carried out on the backlighting
table.
− For fine recognition with one fine recognition window: No action is carried
out after a faulty fine recognition, as sufficient position data is not available.
■ Rough recognition and backlighting table : Combination of the two strategies. First
a rough recognition is carried out. If the rough recognition fails, then a fine rec-
ognition is carried out on the backlighting table. Can only be selected if a back-
lighting table is available.
4
‐
60
Running in a TruTops program 2015-06-01
B579EN