Trumpf BendMaster 150, Руководство оператора

Страница: 147 / 258

6.4 Creating a new BendMaster job from
the TruTops Bend program
1. Press > Set up > Job .
Fig. 59564
2. Press > Job > Build .
3. In the "Building project" window, select the TruTops Bend
program ('*.bnc') from the released directory 'C:\xChange
\parts', from a diskette or from an exchangeable USB storage
medium.
4. Press Open . The job is saved to the control.
The new job and the previously created jobs are displayed in
the "Selected Order" window.
5. Mark the job to be executed in "Selected Order". The
selected job is opened and graphically displayed.
The name of the selected job is displayed in the "Order
Name" field.
Tip
If the job is clicked on again, it is closed.
6. Click on the "Lot Size" field.
7. Enter the production quantity.
8. Press
OK .
The number of successfully bent sheets is displayed.
9. Click on the "Done" field.
10. Enter the quantity.
11. Press
OK .
B579EN
2015-06-01 Running in a TruTops program
4
‐
53
Open order
Defining the lot size
Enter the number of
completed, bent blanks