INSTALLING YOUR CONCRETE RAMP SINK USING
ADJUSTABLE CMU BRACKETS
FSB-B2-AS
FSB-B2-AL
APPLICATIONS
Trueform
Adjustable CMU Brackets
can be mounted to hollow CMU or other masonry surfaces.
TOOLS NEEDED
INCLUDED HARDWARE
Pencil
Tape Measure
Laser level
Torpedo level
Hammer Drill
5/8” Hammer Drill bit
1/2” socket
1/2" box wrench
9/16” socket
Silicone
Shims
Part B2
Part AS or AL (depends on sink depth)
3/8” swivel foot (1 per bracket)
3/8” x 2” head head screw (1 per bracket)
5/16”-18 x 1” bolt (2 per bracket)
5/16”-18 nut (2 per bracket)
3/8” x 3” anchor rod (to be used with epoxy system)
3/8” epoxy sleeve (to be used with epoxy system)
3/8” lock nuts
REQUIRED BUT NOT INCLUDED
Hilti HIT-HY 270 Masonry Chemical Anchor (epoxy system)
Each Adjustable CMU Bracket (FSB-B2-AL or FSB-B2-AS) includes the following:
