Instructions
Before You Cut!
(Blade Cover)
Adjusting The Circle Size
Safety Lock
The blade comes with a blade
cover installed. Instructions on
the back will show you how to
remove the blade cover when
you are ready to begin cutting.
Keep the cover, as you will
need it if you want to replace
the blade cartridge.
Warning: Always make sure
the blade cover is on before
removing or replacing the
blade cartridge.
The clear plastic safety lock can be slid to the
Lock
or
Unlock
position. When it is in the
Lock
position, the blade will not be
able to come all the way down to cut. Slide the safety lock to
the
Unlock
position to cut.
Thank you for purchasing the
TrueCut 360°!
We know it will be a fun and eff ective way to get the perfect circles you
need for your projects. These instructions will help you get started, and teach you about the important features of the
TrueCut 360°. It is recommended you keep these instructions handy and refer to them when needed.
1.
Unlock the sizing knob by rotating
its base counter-clockwise, until the
knob can slide freely.
3.
Lock the sizing knob in place by
rotating its base clockwise until tight.
2.
Slide the knob up or down the cutter to
the desired length. The red line underneath
the knob indicates the circle size.
1-800-264-0644
www.graceframe.com
Blade Cover
Blade Cartridge
Sizing Knob
Sizing Knob