AIS CTRX GRAPHENE Class B AIS Transponder Manual
1.9E
23
CTRX GRAPHENE Manual
Figure 15
Connection of PC to AIS CTRX GRAPHENE takes place via choice of the correct port.
Normally the correct
port will occur as the first choice stating AIS Class B AIS
.
Information on how to configure the unit is given in Appendix A. Restrictions may apply
regarding the configuration of your transponder depending on which country you are a
resident of. Please consult your retailer or contact your Post and Telecom authority.
The
Configuration
page shows the current vessel information and AIS transponder
configuration. Vessel information and configuration can also be edited and saved to the AIS
transponder
In the
Output
GNSS Sentences
field you can select which type of GPS data you would like
to be output on the data port. The default message set is the NMEA sentence
RMC
(Recommended Minimum specific GNSS data) which contains the essential position,
course,
speed over ground and time data.
GNSS SBAS
configuration
allows you to select if
DGNSS (EGNOS or WAAS) corrections are to be used or not.
In the
Configure Baud Rates
window, the baud rate of the NMEA data ports can be
configured. The default setting is 38400 baud which is the common setting for AIS and
should
NOT
be changed on any of the ports. The
NMEA2
port is internal and dedicated to
the optional WiFi interface.
