Blood Collection Kit
Tasso+
Instruction Manual
Blood Collection Tube
Tasso+
Bandage
Alcohol Wipe
Biohazard Bag
Prepaid Return Mailer
Gauze Pad
Instructions
Register Your Kit
Go to trudiagnostic.com/register
(or scan the QR code on the back
of these instructions) to register
your kit. Use your kit’s bar code
and complete your 5 minute health
assessment.
Step 1
Prep Arm
Rub arm quickly and firmly to
encourage circulation.
Wash hands and upper arm
with warm, soapy water. Dry
thoroughly. Use alchohol wipe
to clean arm.
Step 2
Remove the Tasso+ from its
packaging. Unscrew the purple
top from the collection tube
included in your TruAge kit. Insert
tube’s open end straight up into
the Tasso+. Twist slightly for a snug fit.
Remove plastic lid over the red
button. Peel off paper tab on
back of device. While seated,
stick Tasso+ to clean arm,
with the tube hanging straight
down.
Insert Tube
Step 3
Prepare for Activation
Step 4
Begin Collection
Firmly press the red button as far
as it will go, hold for 2 seconds,
then release. Blood should begin
flowing into tube after 1-2 mins.
Tube should fill past the 250ml
line within 5 minutes. Keep arm
straight down during this process.
Step 5
Once you’ve filled past the
250ml mark, remove Tasso+
by peeling from one side. While
keeping Tasso+ upright, removie
tube with a slight twist and
downward motion.
Remove Sample
Step 6
