10
System Operation
Indicator lamps
You can quickly check the operating status of the electric fence security system by viewing the LED
indicator lamps, fitted to Keyswitch, Keypad and the case front of the Compact unit.
Lamp
State
Indicates
Off
When armed, indicates the fence is damaged or security has been
breached
Flashing
The unit has delivered a good fence pulse
Off
Disarmed (Standby mode)
Slow Flashing
Armed but waiting for entry/exit delay to time out
Flashing
Monitor mode (low power daytime operation)
Fast Flashing
Tampering detected
On
Armed
Off
Mains power off and battery disconnected or flat
Slow Flashing
Mains power off and battery good
Fast Flashing
Fault logged (Seek the advice of your installer.)
On
Mains power on and battery good
Off
Normal operation—if armed, system is secure
Flashing
Fence alarm condition present
On
Fence currently secure, but the fence alarm has previously been
triggered
Off Gate
closed
Flashing Gate
open
On
Gate currently closed, but the gate alarm has been triggered
*
Off Normal
operation
Flashing
Panic alarm has been activated.
*A panic indicator lamp is not fitted to Compact unit or the Keyswitch (fitted to the Keypad only).
Notes:
- If the battery is discharged and there is no mains power, the unit automatically switches to
Sleep mode and all indicator lamps turn off to conserve battery life. In addition, the Keypad
and Keyswitch beep every 10 seconds.
- To resume normal operation, charge the battery for a day (connect mains power) before re-
arming the system. If the system still does not function correctly, seek the assistance of your
installer.
