The original English language version/meaning of this warranty controls over all translations and Troy Lee Designs
is not responsible for any errors in translation of this warranty or any product instructions. This warranty is not
intended to confer any additional legal, jurisdictional or warranty rights to you other that those set forth herein or
required by law.
WARRANTY: If any portion of this warranty is held to be invalid or unenforceable for any reason, such finding will
not invalidate any other provision. For products purchased in countries other than the United States, please contact
Troy Lee Designs’ authorized distributor in that respective country.
TO OBTAIN SERVICE UNDER THIS WARRANTY YOU MUST EITHER: Bring or send your Troy Lee Designs Stage Helmet
together with this warranty, the retail seller's original receipt or other satisfactory proof of the date of purchase to
the retailer where you purchased the item. You can also send your Troy Lee Designs Stage Helmet (with the return
authorization number on the outside of the shipping container and affixed to the product), together with the retail
seller's original receipt or other satisfactory proof of the date of purchase to: Troy Lee Designs Attn: Helmet
Warranty Dept., 155 East Rincon. Corona, CA 92879 USA. You must obtain a return authorization number by calling
Troy Lee Designs, at (951)371-5219 or sending an E-mail to [email protected] prior to returning the
product to Troy Lee Designs. Any postage, insurance or shipping cost incurred in sending your Troy Lee Designs
product for service under either option above is your responsibility. Troy Lee Designs will not be responsible for
products lost or damaged in shipping. For products purchased in countries other than the United States please
contact the Troy Lee Designs authorized distributor in the country where the product was purchased. They can be
found on our website at www.troyleedesigns.com Troy Lee Designs may require that you complete and sign a
warranty replacement request form before processing your warranty claim.
CRASH REPLACEMENT POLICY: Troy Lee Designs understands that accidents will happen. As a result, Troy Lee
Designs will assist with the replacement of your helmet by providing a 30% discount off of Troy Lee Designs current
suggested retail price in your respective country. All other provisions of this warranty apply and the procedures
outlined for warranty service apply also to the accident replacement policy. Troy Lee Designs will make the final
decision on whether the part will be covered under the crash replacement policy.
WARRANTY EXCLUSIONS: Retailers and sellers of Troy Lee Designs products are not authorized to modify this
warranty in any way. It is your responsibility to regularly examine the product to determine the need for normal
service or replacement. This warranty does not cover the following:
-Products that have been modified, neglected or poorly maintained, used for commercial purposes, misused or
abused, or involved in accidents.
-Damage occurring during shipment of the products (such claims must be presented directly to the shipper).
-Damage to products resulting from improper assembly or repair, the use or installation of parts or accessories not
compatible with the original intended use of the product, or the failure to follow the product warnings and usage
instructions.
-Damage or deterioration to the surface finish, aesthetics or appearance of the product.
-The labor required to remove and/or re-fit and re-adjust the item covered by this warranty.
-Normal wear to the product.
-Any products for which the consumer does not follow the warranty procedures outlined above. For the current
version of this warranty please visit our website at www.troyleedesigns.com
Helmet specifications are subject to change without notice.
If you have any questions or comments concerning this helmet, please contact your nearest Troy Lee Designs
dealer, call 951-371-5219, visit www.troyleedesigns.com, or e-mail us at [email protected] to locate a dealer
near you.
Please note that these specifications are subject to change without notice, as we are continually striving to improve
our products.
The STAGE helmet meets or exceeds the following safety standards for bicycle helmets: CPSC 16 CFR 1203,
EN1078:2012+A1:2012, ASTM F1952-15, ASTM F2032-15, and AS NZS 2063:2008.
EU Type examination conducted by: SGS United Kingdom Ltd, Weston-super-Mare, BS22 6WA, UK. Notified Body
No: 0120
Product declaration of conformity internet address location: www.troyleedesigns.com/certifications/stage
Australian distribution by: Lusty Industries: PO BOX 89 Wickham, NSW 2293, Australia
New Zealand distribution by: Distribution 101 www.d101.co.nz
www.troyleedesigns.com
(© 2018 Troy Lee Designs)
AS/NZS 2063:2008
- No helmet can protect the wearer against all possible impacts.
- The helmet is designed to be retained by a strap under the lower jaw.
- To be effective, a helmet must fit and be worn correctly. To check for correct fit,place helmet on head and make
any adjustments indicated. Securely fasten retention system. Grasp the helmet and try to rotate it to the front and
rear. A correctly fitted helmet should be comfortable and should not move forward to obscure vision or rearward to
expose the forehead.
- No attachments should be made to the helmet except those recommended by the helmet manufacturer.
- The helmet is designed to absorb shock by partial destruction of the shell and liner. This damage may not be
visible. Therefore, if subjected to a severe blow, the helmet should be destroyed and replaced even if it appears
undamaged.
- The helmet may be damaged and rendered ineffective by petroleum and petroleum products, cleaning agents,
paints, adhesives and the like, without the damage being visible to the user.
- A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear.
- This helmet should not be used by children while climbing or doing other activities where there is a risk of
hanging or strangulation if the child gets trapped whilst wearing the helmet.
Australian distribution by: Lusty Industries: PO BOX 89 Wickham, NSW 2293, Australia New Zealand distribution by:
Distribution 101 www.d101.co.nz
EN
Please visit www.troyleedesigns.com/resgistration to register your product and receive information
