IMPORTANT: READ THE OPERATOR’S MANUAL THOROUGHLY AND FOLLOW
THE SAFE OPERATION PRACTICES WHILE OPERATING THE UNIT
LEA LA TRADUCCIÓN EN ESPAÑOL EN
EL MANUAL.
Read and understand all instruction, warning and danger labels on the unit.
Need Help?
Call 1-800-828-5500
FLIP OVER FOR
Fast Start Guide
NOTE:
Do not plug the extension cord
into the receptacle until the extension
cord is connected to the unit.
Bend the extension cord to form a tight
loop near the cord end. Push the loop
through the bottom hole of the retainer.
3
2
Slide the loop over the retaining clip and
pull down until the cord fits snugly.
4
Clip the switch
cable to the
cable restraints.
Hold the handle bar in the position shown
at left above and slide it onto the lower bars. Align the
holes and insert the bolts as shown at left above, then
screw on the knobs as shown at right above. Make sure
the bail is assembled into the switch assembly.
Bail
Switch Assembly
5
Plug the unit into the extension cord then
the extension cord into a grounded outlet.
NO ASSEMBLY TOOLS REQUIRED
1
