background image

778-13409

© 2015 23AADAAA

Remove the five plastic caps shown below.

Note: 

The first four caps pull off as shown. 

The plastic cap in the inset rotates counter 

clockwise to remove. If choosing not to install 

the soap inlet tube at this time, the plastic cap 

on the soap inlet port of the pressure washer 

pump may remain in place.

Locate the bag containing the 5 multi-

colored spray nozzles, included with the 

loose parts in the carton. Insert the tips 

into the provided mounting holes on the 

pressure washer main unit. Follow the 

color pattern provided on the label on 

the unit for the proper order in which to 

install these tips. 

Connect high 

pressure hose to 

spray gun handle 

by threading the 

hose onto the 

spray gun.

Uncoil and connect the other end of the high 

pressure hose to the pressure washer main unit by 

threading the hose onto the hose port.

Rear Handle

Spray Nozzles

Pressure 

Control  Valve

Spray Handle

Hose Storage 

Hanger

High Pressure 

Hose

High Pressure 

Outlet

Water Inlet 

Port

Spray Handle Extension

Soap Inlet 

Port

Soap Inlet Tube

1

3

2

4

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY 

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .

Need Help?   Call 1-888-TO-HELP-U

Отзывы: