1
Safety
WARNING!
–
Place the unit upright so it is stable and on a sur-
face with sufficient load capacity. Secure the unit
to a wall using the supplied fixing bracket.
–
Make sure that all electrical cables outside the
unit are protected against damage (e.g. from ani-
mals).
–
Before each use, check the unit and connection
parts for possible damage. Do not use defective
units or parts of units.
–
Never use the unit if you discover any damage to
the mains plug, mains cable or mains connec-
tion. Defective mains cables are a serious injury
risk!
If the mains cable of this unit is damaged, a new
one must be installed by the manufacturer, its
customer service or a specialist company in
order to avoid hazards.
–
Insert the mains plug into a correctly fused mains
socket. Lay the mains cable so that no one can
step on the mains cable and there is no risk of
tripping.
–
Select extensions for the mains cable taking into
account the technical data. Fully unroll the exten-
sion cable. Avoid electrical overload.
–
The power connection must comply with the
specifications in the Technical data chapter.
–
Do not cover the unit during operation and do not
place objects such as clothes on the unit.
–
Make sure that the air inlet and air outlet are
clear.
–
Make sure that there are never any loose objects
and dirt in the immediate vicinity of the air inlet
and outlet.
–
Never insert limbs or objects into the unit.
–
After wet cleaning, allow the unit to dry. Do not
operate it when wet.
–
Do not operate or handle the unit with wet or
damp hands.
–
Do not expose the unit to a direct stream of
water.
–
The unit is not a toy. Keep children and animals
away. Use the unit only under supervision.
–
Do not use the unit to suck in vapours or liquids.
–
Switch off the unit and unplug the mains cable
from the mains socket when you are not using
the unit.
–
Before maintenance, cleaning or repair work,
remove the mains plug from the mains socket.
Always unplug the mains cable by holding the
plug (never by the cable).
–
During installation, observe the minimum dis-
tances from walls and objects and the operating
conditions.
–
Do not remove any safety signs, stickers or
labels from the unit. Keep all safety signs,
stickers and labels in a legible condition.
–
Dispose of replaced filters properly, especially
after filtering out harmful substances (e.g.
asbestos or paint mist).
1.1 Correct use
The TROX air purifier is used to purify atmospheric air
indoors. As a stationary air purifier, the unit ensures a
relevant reduction in dust and aerosol concentration in
the indoor air. By using a HEPA filter H13, it filters
99.95% of all aerosols out of the air and thus effectively
reduces the infection risks.
The unit is used for purifying the indoor air in heavily fre-
quented rooms, such as:
Waiting and reception areas
Meeting or conference rooms
Schools
Trade fair booths
Dining rooms
Shops
Incorrect use
WARNING!
Danger due to incorrect use!
Misuse of the unit can lead to dangerous situations.
Any use other than that specified in this manual is
prohibited. In case of non-observance, any liability
and the right to claim under warranty expires.
Incorrect use includes:
–
Any use that is not described in the manual.
–
Operation that does not comply with the tech-
nical data.
–
Modifying of the unit by others, tampering with
the unit.
–
Operation or installation in areas with potentially
explosive atmospheres.
–
Operation in rooms where the indoor air contains
particles that are conductive, aggressive, corro-
sive, combustible or hazardous to health
–
Operation in rooms where the humidity is perma-
nently high (> 90 %)
–
Operation outdoors
–
Use of the air purifier for forced ventilation
–
Operation without air filters
–
Use of non-genuine replacement parts or acces-
sories, whose quality and function are not equiv-
alent to those of the original parts
Safety
Correct use
TROX AIR PURIFIERS TAP-L
TAP-M
6
