Trox Technik FKT-EU, Инструкция по установке и эксплуатации

Страница: 17 / 28

7 Making electrical connec-
tions
General safety notes
DANGER!
Danger of electric shock! Do not touch any live com-
ponents! Electrical equipment carries a dangerous
electrical voltage.
– Only skilled qualified electricians are allowed to
work on the electrical system.
– Switch off the power supply before working on
any electrical equipment.
7.1 Equipotential bonding
If equipotential bonding is a requirement, there must be
an electrical earth connection from the fire damper to
the duct. In the event of a fire, mechanical loads from
the equipotential bonding must not affect the fire
damper.
 Fire dampers with flange: The flange of the fire
damper is used for equipotential bonding; no drilled
holes are required in the damper casing.

Fire dampers without flange (circular): Suitable
clamps or similar parts may be used for equipoten-
tial bonding. It is possible to make drilled holes near
the spigot.
7.2 Connecting the spring return
actuator
Personnel:

Skilled qualified electrician
Fig. 6: Actuator connection, example
1 Switch for opening and closing, to be provided by
others
2 Optional release mechanism, e.g. TROX duct
smoke detector Type RM-O-3-D or RM-O-VS-D
3 Indicator light for CLOSED position, to be provided
by others
4 Indicator light for OPEN position, to be provided by
others

The fire damper may be equipped with a spring
return actuator for a supply voltage of 230 V AC or
24 V AC/DC. See the performance data on the
rating plate.

The spring return actuator must be connected
according to the wiring example shown. Several
actuators can be connected in parallel as long as
the performance specifications are taken into con-
sideration.
 Connection boxes must be fixed to the adjoining
structure (wall or ceiling slab). They must not be
fixed to the fire damper.
Actuators with 24 V AC/DC
Safety transformers must be used. The connecting
cables are fitted with plugs. This ensures quick and
easy connection to the TROX AS-i bus system. For con-
nection to the terminals, shorten the connecting cable.
Making electrical connections
Connecting the spring return actuator
Tunnel fire damper Type FKT-EU 17