Trox Technik FKRS-EU, Инструкция по установке и эксплуатации

Страница: 163 / 176

8.3 Functional test with automatic con-
trol unit
Functional test with automatic control unit
The function of fire dampers with a spring return
actuator can also be tested with an automatic control
unit. The control unit should have the following func-
tions:

Opening and closing fire dampers in regular inter-
vals (intervals to be set by the system owner)

Monitoring of the actuator running times

Issuing an alarm when the running times are
exceeded and when fire dampers close

Recording the test results
TROXNETCOM systems such as TNC-EASYCON-
TROL or AS-interface meet all these requirements. For
more informationen see www.troxtechnik.com .
TROXNETCOM systems allow for automatic functional
tests; they do not replace maintenance and cleaning,
which have to be carried out in regular intervals or
depending on the condition of the product. The docu-
mentation of test results makes trends visible, e.g. the
run time of actuators. They may also indicate the need
for additional measures which help to maintain the sys-
tem's function, e.g. removing heavy contamination (dust
in extract air systems).
Functional test
Functional test with automatic control unit
Fire damper Type FKRS-EU 163