Trox Technik EM-IP Скачать руководство пользователя страница 10

Страница: 10 / 80

Web server settings

3.1 Supported browsers

Browsers for Mac OS X

The following web browsers may be used with Mac OS-



Safari

version 6.0.5 or higher



Google Chrome

version 70.0.xxx or higher



Mozilla Firefox

version 60 or higher

Browser with Microsoft Windows

The following web browsers may be used with Microsoft

Windows:



Microsoft Internet Explorer

version 8 or higher



Google Chrome

version 70.0.xxx or higher



Mozilla Firefox

version 60 or higher

3.2 Standard IP addresses

EM-IP has the following standard IP address:

169.254.0.1/16 (i.e. subnet mask 255.255.0.0).

The integral DHCP server is not active upon delivery.

Use the Reset push button to activate it.

If the connected PC is a DHCP client and if there is no

DHCP server, the client should generate its own

address within 60 seconds. As a consequence, EM-IP

can access the web server even if the network charac-

teristics of the PC are not changed.

3.3 Supported users

Personnel:



Network administrator

NOTICE!

Danger of injury or risk of damage to property

due to insufficiently qualified individuals!

Only network administrators may enter or change

data for the web server

Chapter 1.6 ‘Qualified

staff’ on page 6

If unauthorised individuals make changes in the

setup menu, the warranty becomes void.

The

‘Setup’

menu of the web server is password pro-

tected to prevent unauthorised individuals from entering

or changing data. The Setup menu has been configured

for different user groups.

User

(group)

Rights

Default pass-

word

Guest

Read-only access to

‘General settings’

–

User

Can change operating

mode default settings

and selected parame-

ters for EM-IP

User

Admin

Can change user and

admin passwords as

well as all other settings

including BACnet/IP

and Modbus/IP

Admin

NOTICE!

Change your password!

The password for each user group defaults. The

default passwords have to be changed by the net-

work administrator at the time of commissioning

‘Displaying user administration’ on page 18

User and Admin cannot access the software at the

same time.

When Admin logs on to the web server, any User

connection that may be active at that time is termi-

nated.

User will be informed accordingly by a system mes-

sage.

3.4 Displaying the configuration

manual as PDF document

Fig. 2: 'Help' menu

Web server settings

Displaying the configuration manual as PDF document

Expansion module EM-IP

Содержание EM-IP

















































































Результаты поиска

Содержание EM-IP

Отзывы:

Trox Technik EM-IP, Руководство по настройке, Страница: 10 / 80

Результаты поиска

Содержание EM-IP

Отзывы: