Trox Technik EASYLAB BE-LCD-01 Скачать руководство пользователя страница 7

M

Fume cupboard control

BE-LCD-01

TCU3

The BE-LCD-01 control panel is used to 

display and control the most critical aerodynamic

functions of a fume cupboard controlled by an

EASYLAB TCU3 fume cupboard controller.
The range of functions can be configured 

individually. The control panel has eight 

function button fields that are visible or 

not visible according to the configuration.
• Available function:

blue symbol

• Active function:

white symbol

The basic functions are available for all fume 

cupboards. Other functions may be available

depending on the configuration and operating

state.

7

BE-LCD-01 Operating and Installation Manual / Leaflet no. M375EV8 (01/2015)

Delivery check

Check delivered items immediately after arrival for

transport damage and completeness. In case of any

damage or an incomplete shipment, inform the

shipping company and your TROX contact person

immediately.
A complete shipment includes:
• BE-LCD-01 control panel with adapter
• Connecting cable, approx. 5 m, patch cable, blue
• Operating and installation manual

Transport on site

• If possible, take the control panel in the transport

packaging up to the installation location.

• Do not remove the protective wrapping until just

before installation.

Storage

If you need to store the control panel temporarily,

make sure that the following conditions apply:
• Leave the unit in its packaging and do not expose

it to the effects of weather.

• Store the unit in a dry place and away from direct

sunlight.

• Temperature: –10°C to +70°C 

Maximum humidity: 90% (non-condensing)

Packaging

Properly dispose of packaging material.

Fume cupboard control

The BE-LCD-01 control panel fulfils the 

requirements of EN 14175 for fume cupboard 

operation and status displays. 

It can be used to control an automatic sash 

device as well as fume cupboard lighting. It works 

in combination with the ‘fume cupboard control

equipment function of the TCU3 EASYLAB 

controller and displays regular operating states 

and values.

4 Transport, storage and packaging

5 Operation · Fume cupboard control

Содержание EASYLAB BE-LCD-01

























Отзывы: