Trox Technik Compact XM0, Инструкции по установке и вводу в эксплуатацию

Страница: 27 / 45

Adjustment sticker
Fig. 26: Adjustment sticker XM0 and XS0
①
Commission number. Order number
② Type designation of terminal unit
③
Nominal size
④ Control component
⑤
Operating mode
M ð Modbus
F ð constant value
V ð variable
0 or 2 ð characteristic type
⑥ Characteristics 0 – 10 V or 2 – 10 V
⑦
Volume flow rate ranges q
vmin
– q
vmax
or constant
value
⑧
Nominal volume flow rate q
vnom
⑨ Hardware type designation
⑩
Control components:
OF ð equipped at the factory
SP ð replacement part
⑪ Serial number
⑫
Test ID number
8.2 Service tools functional overview
Functions Display Adjust-
ment
device
PC soft-
ware
Actual value display
✔ ✔ ✔
Changes from q
vmin
and q
vmax
✔ ✔ ✔
Mode setting (0…10
V / 2…10 V /
Modbus)
✔ ✔ ✔
Record running
times (operating
time, running time,
ratio)
✖ ✖ ✔
Perform test run
function
✔ ✔ ✔
Setpoint value signal
in Y [V]
✔ ✔ ✔
Actual value return
U [V]
✔ ✔ ✔
Assign bus address
✔ ✔ ✔
Set Modbus param-
eter sets
✔ ✔ ✔
8.2.1 Display XM0 / XS0
Current values can be read, operating parameters can
be set and the status can be read from the control com-
ponent.
After applying the supply voltage, various functions are
available.
Additional information:

Ä
Chapter 7 ‘Operation and status of the control
component’ on page 23
8.2.2 Adjustment device GUIV3-M
Fig. 27: GUIV3-M is connected to the control compo-
nent by means of the cable provided in the supply
package.
Commissioning and operation
Service tools functional overview > Adjustment device GUIV3-M
Control component Compact XM0 • XS0 for VAV terminal unit TVE 27