Trox Technik CAV controllers, Руководство по установке

Страница: 1 / 14

Product overview
Fig. 1: Air terminal unit type EN
1 Damper blade
2 Bellows
3 Bellows inlet
4 Scales sticker
5 Display damper blade position ð Fig. 2
6 Hand wheel
7 Vmin-/Vmax actuator (optional)
Damper blade position display
The display is used to evaluate the throttle position
of the damper blade, e.g. in order to optimise the
control of the fan or the section regulation.
Attention: The display must not be adjusted.
Fig. 2: Display of the damper blade position
1 Damper blade in maximum throttle position -
Reduce system pressure
2 Damper blade in open position - System pres-
sure too low
Vmin-/Vmax actuator (optional)
Fig. 3: Vmin-/Vmax actuator
1 Vmax potentiometer
2 'Test' push button
3 Vmin potentiometer
4 LED status display
LED status display:
LED lit - Set position reached
LED flashes once per
second - Actuator moves
LED flashes twice per
second - Actuator blocks
LED off - No supply voltage
Functional test actuator
Press the test push button (> 2 s)
ð 
Actuator turns toward Vmin
 Actuator turns toward Vmax

Actuator returns to starting position
Installation manual
GB/en
CAV controllers
EN
TROX GmbH
Heinrich-Trox-Platz
47504 Neukirchen-Vluyn
Germany
Phone: +49 (0) 2845 2020
Fax: +49 (0) 2845 202265
E-mail: trox@trox.de
http://www.troxtechnik.com
A00000075031, 12/2019,
©
2017 TROX GmbH
CAV controllers EN 1