14
EN
dehumidifier TTK 655 S
Cleaning the air filter
Note
Ensure that the air filter is not worn or damaged. The
corners and edges of the air filter must not be
deformed or rounded. Before reinserting the air filter,
make sure that it is undamaged and dry!
The air filter has to be cleaned as soon as it is dirty. This is
brought to light e.g. by a reduced capacity (see chapter Errors
and faults).
1. Remove the air filter from the device.
2. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
3. Allow the filter to dry completely. Do not insert a wet filter
into the device!
4. Reinsert the air filter into the device.
Activities required after maintenance
If you want to continue using the device:
•
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
•
Store the device according to the Storage chapter.
Technical annex
Technical data
Parameter
Value
Model
TTK 655 S
Dehumidification performance
@ 30 °C / 80 % RH
91 l / 24 h
Dehumidification performance,
max.
150 l / 24 h
Operating range (temperature) 5 – 32 °C
Operating range (relative
humidity)
50 % – 90 % RH
Max. permissible pressure
1.8 MPa
Pressure suction side
0.5 MPa
Pressure outlet side
1.8 MPa
Air volume flow
1000 m³/h
Mains connection
220-240 V ~ 50 Hz
Power consumption, max.
1.9 kW
Nominal current
8.6 A
Refrigerant
R454C
Amount of refrigerant
1050 g
GWP factor
146
CO
2
equivalent
0.15 t
Sound pressure level LpA (1 m;
complies with
DIN 45635-01-KL3)
56 dB(A)
Dimensions (length x width x
height)
620 x 515 x 858 mm
Minimum distance to walls and
other objects
A: top:
B: rear:
C: side:
D: front:
50 cm
50 cm
50 cm
50 cm
Weight
55 kg
