3
Operating manual – Infrared heating panel TIH 500 S / TIH 700 S
EN
Device description
The infrared heating panel TIH 500 S / TIH 700 S is used to heat
interior spaces.
The infrared heating panel ensures an even heat distribution in
the room.
Device depiction
• Remove all packing materials which serve to protect the
device during transport.
• Should the device be damaged, please contact the
responsible dealer where the purchase was made.
Storage
• Store it in a dry location and protect it against dust.
• Before restarting the device, check the condition of the power
cable. If there are doubts as to the sound condition, contact
the customer service.
1. Spread out the foil over the back of the device and mark the
positions for the bore holes.
2. Attach the foil to the wall using adhesive tape or similar.
3. Drill the holes into the wall at the positions marked on the foil.
4. Insert suitable dowels into the bore holes.
5. Insert the screws into the dowels and fasten the screws.
– The screws should protrude approx. 0.5 cm from the dow-
els.
6. Hang the device in.
Information about the device
No.
Operating element
1
Heating element
2
Power cable
3
Wall attachment
Transport and storage
1
3
2
2
3
Assembly
