EN
7
infrared heating panel TIH 350+ / TIH 650+
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before
transporting the device, observe the following:
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
•
Allow the device to cool down sufficiently.
Storage
Before
storing the device, proceed as follows:
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Allow the device to cool down sufficiently.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust if necessary
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
Assembly and installation
Scope of delivery
•
1 x Device
•
1 x Manual
•
2 x Foot
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
Upon delivery the device
TIH 350+
/
TIH 650+
is already
partially preassembled. The feet still need to be mounted.
Mounting the feet
Info
The assembly of the feet is identical for both devices
TIH 350+ and TIH 650+.
Please proceed as follows to assemble the feet at the device:
1. Detach the feet from the heating panels.
ð
Fold the feet outwards and away from the device. Make
sure that the bolt of each foot (7) disengages from the
locking device (6).
7
6
2. Position the device either upright or horizontally as desired.
