Trotec TFC 220 E, Руководство по эксплуатации

Страница: 7 / 14

EN 7 fan heater TFC 220 E
Operation
• Avoid open doors and windows.
Control panel
9
11
12
14
10
13
15
16 17
18
19
21
20
22
23
8
No. Designation Meaning
8 Timer indication Displayed when the timer is
activated.
9 Comfort mode indication Displayed when comfort mode
is activated.
10 Night mode indication Displayed when night mode is
activated.
11 Eco mode indication Displayed when eco mode is
activated.
12 Frost monitor function
indication
Displayed when the frost
monitor function is activated.
13 Infrared receiver For signal reception from the
remote control
14 Temperature button For setting the desired room
temperature
15 Timer button For switching the timer
function on and off:
setting range of 1 min to 24 h
in increments of 1 min
16 Increase value button For setting the desired room
temperature (15 °C to 35 °C)
or the number of hours and
minutes for the timer (1 min to
24 h)
17 Decrease value button
No. Designation Meaning
18 MODE button For selecting the operating
mode:
Comfort mode
Night mode
Eco mode
Frost monitor function
19 Power button For switching the device on or
activating standby mode
20 Heating indication Displayed when the heating is
activated.
21 Fan rundown function
indication
Displayed when the fan
rundown function is activated.
22 Hours / minutes
indication
Indication of the number of
hours and minutes during
timer programming
Indication of remaining timer
run-time
23 Temperature indication Indication of the current room
temperature during operation
Indication of the desired room
temperature during
temperature adjustment
Info
The display can be illuminated in two brightness levels.
The background illumination is brighter when one of
the control panel buttons is pressed. After approx. 15 s
without any input, the brightness level will be reduced.
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Set the on/off switch (7) to I .
ð
An acoustic signal is emitted.
ð
The device is now in standby mode.
ð
The room temperature is displayed in the temperature
indication (23).
Info
In standby mode, the device memorizes the room
temperature setting.