Trotec TFC 13 E, Руководство по эксплуатации

Страница: 6 / 12

5 EN Operating manual – fan heater TFC 13 E / TFC 14 E
Assembly and installation
Scope of delivery
• 1 x Device
• 1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
C
C
D
• Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
• Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
• Make sure that extension cables are completely unrolled.
• Make sure that no curtains or other objects interfere with
the air flow.
• Do not position the device directly below a wall socket.
• Make sure that the device cannot come into contact with
moisture or water.
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.
• Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
• Avoid open doors and windows.
Control panel
1
2
No. Designation
1 Operating light
2 Function selector switch for ventilation and heating
levels
0 : OFF
: cold air / ventilation
I : heating level 1 (700 W)
II : heating level 2 (1400 W)
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.