Trotec TCH 2010 E, Руководство по эксплуатации

Страница: 6 / 15

5 EN Operating manual – designer glass convector TCH 2010 E / TCH 2011 E
Assembly
Assembly of feet with castors
1. Place the device on a table or on the packaging board with
the glass surface pointing down.
2. Fasten both feet (3) with 3 screws each.
3
3. Check the feet (3) for tight fit.
4. Set the device up in an upright and stable position.
5. If required, engage the parking brakes (7) by pushing the
lever down.
MODE TIME
TEMP
TCH2010 E
7
Wall mounting
Instead of being positioned on the feet, the device may also be
mounted to a wall.
100 cm
5 cm
50 cm
50 cm
• Do not install the device directly behind a door.
• Do not install the device directly below a wall socket.
• Never install the device in a way that it radiates directly
onto walls or other objects.
• Only install the device in a horizontal position.
1. Mark the positions for the bore holes on the wall. Observe
the minimum distances.
515 mm
265 mm
280 mm
2. Drill the holes into the wall at the marked positions.