EN
4
Operating manual – designer glass convector TCH 2010 E / TCH 2011 E
Device depiction
MODE
TIME
TEMP
TCH2010 E
1
2
3
7
6
5
4
No.
Designation
1
Display
2
Control panel
3
Foot with castors
4
Temperature sensor
5
On/off switch
6
Holes for fastening screws
7
Parking brake for castors
Transport and storage
Notice
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with wheels.
Before
transporting the device, observe the following:
•
Switch the device off.
•
Release the brakes at the castors.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Do not use the power cable to drag the device.
•
Allow the device to cool down sufficiently.
Storage
Before
storing the device, observe the following:
•
Allow the device to cool down sufficiently.
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust if necessary
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
•
Remove batteries from the remote control.
Assembly and installation
Scope of delivery
•
1 x Device
•
1 x Remote control
•
3 x Screw for wall mounting (large)
•
3 x Plastic wall plug for wall mounting
•
2 x Foot
•
7 x Screw for feet (small)
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Содержание TCH 2010 E
Страница 14: ......
