EN
7
multiple socket outlet PV4-MID-PS
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
To make the device easier to transport, it is fitted with a carry
handle.
Before
transporting the device, observe the following:
•
Always close the sealing cap of the MID-compliant energy
meter before transporting the device.
Storage
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
protected from dust and direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
The storage temperature is the same as the range given in
the Technical data chapter.
Start-up
Warning of electrical voltage
Work on the electrical components must only be
carried out by a qualified electrician!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Note
Prior to initial start-up, have all pre-assembled
connection screws inside the housing checked and, if
necessary, retightened by a qualified electrician.
•
Do not create tripping hazards when laying the power
cable or other electric cables when positioning the device.
If necessary, use cable bridges.
•
Make sure that extension cables are unrolled completely.
•
Do not cover the device.
•
Do not place any further objects on the device.
•
Insert the CEE plug into a properly secured socket.