Trotec PHDS 10-20V, Руководство по эксплуатации

Страница: 7 / 20

EN 6 Operating manual – cordless hammer drill PHDS 10-20V
Warning
The tool holder must be firmly locked in place before
switching the device on, for an insufficiently or
incorrectly clamped insertion tool could be catapulted
out of the tool holder uncontrollably upon switch-on.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
Caution
Keep a sufficient distance from heat sources.
Notice
To avoid damaging the gear, only change the rotational
direction when the device is at a standstill.
Notice
Set the torque and rotational direction according to the
operating mode. A wrong selection may damage the
device.
Notice
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Information about the device
Device description
The cordless hammer drill has two speed levels: while the first
speed level is suitable for screwing, drilling and impact drilling
can be performed using the second speed level.
The integrated torque selection, including a setting each for
drilling and impact drilling, allows you to use the optimum
power for every application, adapted to the material and screw
size.
The keyless drill chuck with automatic spindle lock further
enables an easy and tool-free exchange of the insertion tools.
The integrated LED work lamp offers an improved illumination of
the workpiece or working surface,
and the preassembled belt clip facilitates transport and provides
faster access to the device.