EN
11
cordless pruning shears PGSS 15-20V
Inserting the battery
1. Slide the battery (
4
) into the holder (
10
) until it locks in
place.
4
Removing the battery
1. Detach the battery (
4
) from the device by pressing and
holding the unlocking button (
9
, I.) and pulling the battery
off the device (II.).
9
4
2. If required, charge the battery (
4
) as described in the
section
Charging the battery
.
Checking the battery charging status
The battery comes with an integrated battery level indication.
The battery status is displayed as follows by the three LEDs of
the battery level indication (
8
):
LED colour
Meaning
Green – Orange – Red
maximum charge / power
Orange – Red
medium charge / power
Red
weak charge – recharge the
battery
1. Press on the battery icon (
13
) on the battery (
4
).
ð
You can read the battery status from the battery level
indication (
8
).
13
8
Operation
Warning
Do not work outdoors with the device in case of
approaching rain or thunderstorms. The device may
attract a lightning strike. Water ingress into the
housing can cause an electric shock.
Warning
Risk of injuries caused by parts flung out
uncontrollably. Never use the device if children, other
people or pets are nearby! Also make sure to keep
enough distance to your hands and feet.
Tips and notes on handling the garden pruner
General information:
•
For best results, keep the blade sharp at all times.
•
Put the protective cover on the blade after each use.
Trimming hedges or branches
•
Before starting to work, check the hedge for any hidden
foreign objects such as parts of garden fences.
•
Only cut branches up to a thickness of max. 15 mm.
Cutting soft wood and plants
•
Only cut soft wood, branches and plants up to a thickness
of 28 mm.