background image

4

EN

battery charger PBCS 2A

Residual risks

Warning
Explosion hazard!

Using the device may produce explosive gas. Prevent
spark formation that is caused for instance by smoking
and open fire. Ensure sufficient ventilation.

Warning of caustic substances

The acid contained in the battery is corrosive. Rinse out
acid splashes thoroughly immediately with plenty of
water and consult a doctor in case of an emergency.

Warning of electrical voltage
Electric shock due to lightning strike.

Do not work outdoors in case of approaching
thunderstorms.
In case of a thunderstorm, disconnect the device from
the mains.
The operator is responsible for the lightning protection
of the building.

Warning of electrical voltage

Electric shock due to insufficient insulation!
Check the device for damages and proper functioning
before each use.
If you detect damages, do not use the device any
longer.
Do not use the device when either the device or your
hands are damp or wet!

Warning of electrical voltage

Before any work on the device, remove the mains plug
from the mains socket!
Do not touch the mains plug with wet or damp hands.
Hold onto the mains plug while pulling the power cable
out of the mains socket.

Warning of electrical voltage

Work on the electrical components must only be
carried out by an authorised specialist company!

Caution

Keep a sufficient distance from heat sources.

Note

To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.

Note

Do not use abrasive cleaners or solvents to clean the
device.

Information about the device

Device description

The device serves to charge various battery types of vehicles.
The device charges the battery by transporting mains current
into the battery via a charging cable. A second charging cable is
attached for the purpose of earthing on one of the points
specified in the vehicle’s instructions.
The microprocessor control ensures that the multi-stage
charging process is monitored and adapted automatically.
In the 

winter charging mode,

 the battery can be charged at an

outdoor temperature of -20 °C to +5 °C.
In the 

trickle charging mode,

 the battery can be protected

against deep discharge and maintained at a permanently ideal
charging level, e.g. for seasonally used vehicles with long
downtimes.
The device features IP65 type of protection and is dust-tight and
protected against water jets.
The device is provided with protective mechanisms protecting
the charger and battery, including reverse polarity protection
and protection against short circuits.
Fully insulated battery terminals and a suspension eye for wall
mounting provide for safe and convenient use.

Scope of delivery

1 x Battery charger

1 x Manual

Device depiction

1

2

3

4

No.

Designation

1

Black battery terminal ( - )

2

Red battery terminal ( + )

3

Control panel

4

Suspension eye

Содержание PBCS 2A











Отзывы: