Trotec DH 15, Оригинальное руководство пользователя

Страница: 11 / 23

EN 11 dehumidifier DH 15 / DH 30 / DH 60
Regulating the room humidity level
Set the desired humidity level via the control dial (5) of the
hygrostat.
5
Automatic defrost
If the room temperature is lower than 15 °C, the heat exchanger
will freeze during dehumidification. The device will then carry
out an automatic defrost. The duration of the defrost process
can vary depending on the room temperature. The lower the
temperatures, the longer the defrost period.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Hold onto the mains plug while pulling the power cable out
of the mains socket.
• Remove the residual fluid from the condensation drain
hose.
• Clean the device according to the Maintenance chapter.
• Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
• Check the power connection.
• Check the power cable for damages.
• Check the on-site fusing.
• Check the preselected humidity level at the hygrostat's
control dial. The humidity in the room must be above the
selected range. Reduce the preselected desired humidity
level.
• Have the electrics checked by a specialist company for
cooling and air-conditioning or by Trotec.
The device is running, but there is no formation of
condensate:
• Check whether the condensation drain hose is positioned
correctly.
• Check the room temperature. Observe the device's
permissible operating range according to the technical
data.
• Ensure that the relative humidity complies with the
technical data.
• Check the preselected humidity level at the hygrostat's
control dial. The humidity in the room must be above the
selected range. Reduce the preselected desired humidity
level.
The device is loud or vibrates:
• Check whether the device is mounted horizontally.
• Check the inside of the device for dirt. Clean the interior of
the device if necessary.
The device gets very warm, is loud or loses power:
• Check the air inlets for dirt. Remove external dirt.
• Check the inside of the device for dirt. Clean the interior of
the device if necessary.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to a specialist company for cooling and air-conditioning
or to Trotec for repair.