Trotec BP17, Руководство по эксплуатации

Страница: 5 / 9

EN 4 pyrometer BP17
Technical data
Parameter Value
Model BP17
Weight 188 g
Dimensions
(length x width x height) 151 mm x 42 mm x 105 mm
Measuring range -50 °C to 380 °C
(-58 °F to 716 °F)
Resolution 0.1 °C / °F
Target display Laser class II, 630 to 660 nm
< 1 mW
Accuracy ± 2 °C or ± 2.0 % of the
measured value
(the higher value applies) if
T > 0 °C
± 3 °C of the measured value if
T ≤ 0 °C
Degree of emission 0.95
Optical resolution 10:1 (D:S)
Smallest measuring spot ø 12.7 mm (distance 127 mm)
Spectral sensitivity 8 to 14 μm
Response time < 0.5 s
Operating temperature 0 °C to 50 °C (32 °F to 122 °F),
10 % to 90 % RH
Storage conditions -10 °C to 60 °C, < 80 % RH
Power supply 9 V battery
Switch-off After approx. 15 seconds of
non-use
Scope of delivery
• 1 x Pyrometer BP17
• 1 x 9 V battery
• 1 x Device bag
• 1 x Quick guide
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
For transporting the device use a suitable bag to protect it from
external influences.
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• protected from dust and direct sunlight
• with a cover to protect it from invasive dust if necessary
• The storage temperature is the same as the range given in
the Technical data chapter.
• Remove the batteries from the device.
Operation
Inserting the battery
Note
Make sure that the surface of the device is dry and the
device is switched off.
20
19
1. Open the battery compartment by folding open the
cover (20) with your fingers.
2. Use the battery clip (19) to connect the new battery with
correct polarity.
3. Insert the battery in the battery compartment.
4. Close the cover of the battery compartment.