EN
15
air cleaner AirgoClean® 250 E
2. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
3. Allow the filter to dry completely. Do not insert a wet filter
into the device!
4. Reinsert the prefilter into the device.
5. Press the Ionizer button (
10
) for 3 seconds to reset the
prefilter.
Activities required after maintenance
If you want to continue using the device:
• Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
• Store the device according to the Storage chapter.
Technical annex
Technical data
Parameter
Value
Model
AirgoClean
®
250 E
Air flow rate with HEPA
carbon filter
Fan stage
I
Fan stage
II
Fan stage
III
Turbo mode
384 m
3
/h
503 m
3
/h
624 m
3
/h
740 m
3
/h
Ambient temperature
-10 °C to 45°C
Operating range
0 % to 95% RH
Mains connection
220-240 V / 50 Hz
Power consumption
45 W
Nominal current
0.17 A
Sound pressure level (at
a distance of 1 m)
56 dB(A)
Dimensions (length x
width x height)
360 x 360 x 710 mm
Minimum distance to
walls and other objects
A: top
B: rear
C: side
D: front
30 cm
30 cm
30 cm
30 cm
Weight
12 kg
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website https://de.trotec.com/shop/.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.