14
EN
air cleaner AirgoClean® 200 E
Cleaning the pre-filters
If the
Clean
indication of the
Prefilter
LED (
19
) is illuminated and
the last bar of the LED is illuminated in red, cleaning of the
prefilters is required (see chapter Operation and chapter Errors
and faults).
Please proceed as follows on both sides of the device:
1. Remove the prefilter (
20
) from the device.
20
2. Clean the filter using a slightly damp, soft, lint-free cloth. If
the filter is heavily contaminated, clean it with warm water
mixed with a neutral cleaning agent.
3. Allow the filter to dry completely. Do not insert a wet filter
into the device!
4. Reinsert the prefilter into the device.
5. Press the
Air quality
button (
9
) for three seconds to reset
the
Prefilter
LED (
19
).
Activities required after maintenance
If you want to continue using the device:
•
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
•
Store the device according to the Transport and storage
chapter.
Technical annex
Technical data
Parameter
Value
Model
AirgoClean
®
200 E
Max. air flow rate with
HEPA carbon filter
524 m
3
/h
Ambient temperature
-10 °C to 45 °C
Operating range
0 % to 95 % RH
Mains connection
220-240 V / 50 Hz
Power consumption
38 W
Nominal current
0.17 A
Sound pressure level
54 dB(A)
Dimensions (length x
width x height)
310 x 310 x 680 mm
Minimum distance to
walls and other objects
A: top
B: rear
C: side
D: front
30 cm
30 cm
30 cm
30 cm
Weight
10.5 kg
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. You can also find out about other return options
that apply for many EU countries on the website
https://hub.trotec.com/?id=45090. Otherwise, please contact an
official recycling centre for electronic and electrical equipment
authorised for your country.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.